- 您现在的位置：买卖IC网 > Sheet目录288 > 300-12-750 (Patco Electronics)BATTERY CHARGER/DUAL OUT PUT
The InteliTender Model 300 is suitable for both charging and tending batteries of 100 Amp Hour capacity and less. The
instrument is available in 6 and 12 volt versions. When larger batteries are involved, the charging time increases, but the ability to
Tend or maintain is undiminished through 100 Amp Hours. The InteliTender 300 is designed primarily for use in either
recharging smaller batteries in the range of 25 Amp Hours, or charging and Tending batteries used intermittantly up to 100 Amp
Hours. If a larger batteries must be recharged quickly, the Model 520 or Model 1200 may be used. To determine which charger is best
suited to recharge a given battery, divide the Amp-Hour capacity of the battery to be recharged by 10, and choose the instrument
whose Bulk Charge current is closest to that number. Figure 3 permits the user to determine the approximate recharge time for a
battery that has given up 70% of its rated capacity. This discharge exceeds most manufacturers recommendations, where maximum
discharge is limited to 60% of rated capacity.
FIGURE 3
Specifications
FIGURE 4
Model 300-6
Model 300-6/750
Model 300-12
Model 300-12/750
Bulk Charge
1.5 Amps
.75 Amps
1.5 Amps
.75 Amps
Current
Bulk Charge
5 - 7 Volts
5 - 7 Volts
10 - 14 Volts
10 - 14 Volts
Voltage Range
Absorption Mode
1.4 - .5 Amps
.70 - .25 Amps
1.4 - .5 Amps
.70 - .25 Amps
Current
Absorption Mode
7 -7.25 Volts
7 -7.25 Volts
14 -14.5 Volts
14 -14.5 Volts
Voltage Range
Float Voltage
DC Voltage In
AC Voltage In
Frequency In
Power In
6.9 Volts
11-30 VDC
220 VAC
60 Hz
30 Watts
6.9 Volts
11-30 VDC
220 VAC
60 Hz
20 Watts
13.8 Volts
11-30 VDC
220 VAC
60 Hz
50 Watts
13.8 Volts
11-30 VDC
220 VAC
60 Hz
30 Watts
Size:
7” Long, 2.5” High, 3.5” Deep
Mounting:
4 ea #6 screws, 7.75” x 2.75”
Weight:
4.2 lbs., 1.9 Kg
Aluminum body
Electrolytic Hardcoat
0-50 Degrees C
Construction:
Finish:
Operating Temperature:
Optional, -40 - 50 Degrees C
PATCO ELECTRONICS, INC . * 1855 SHEPHARD DRIVE * TITUSVILLE * FL * 32780
PHONE (321) 268-0205 FAX (321) 264-4253
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
3201-750
BATTERY CHARGER 6 VOLT 0.8 AMP
338360-1
CONN MOD JACK 8/8 VERT T/H
3399-G600
CONN SOCKET 26POS OPEN GOLD
3471-0000
CONN SOCKET 34POS BACK PLANE
3473-G000
CONN SOCKET 10POS OPEN COVER
34AA02-E/P
IC EEPROM 2KBIT 400KHZ 8DIP
34KM-K206-00W
85 SIZE HYBRID 1.8 DEG/STEP
34VL02/ST
IC EEPROM 2KBIT 400KHZ 8TSSOP
相关代理商/技术参数
300128-01
制造商:TKP 功能描述:300128-01
300129
功能描述:BAG STATIC SHLD MTL IN 9"X12" 制造商:scs 系列:1000 零件状态:有效 类型:静电屏蔽袋 金属层:输入 静电放电屏蔽:<10nJ 闭合系统:密封袋 厚度:2.8 mil （71.12 微米） 长度 - 内部:9"（228.6mm） 宽度 - 内部:12"（304.8mm） 拉伸强度:4600 psi 颜色:银 标准包装:2,500
30-012B
制造商:Datak Corporation 功能描述:
30013
制造商:CRC 功能描述:PAINT, MARKER, AQUA, FLUO BLUE, 500ML
300-130
制造商:Eclipse Tools 功能描述:Crimpers, Ergo-Lunar Frame W/ Die
3001310
制造商:Phoenix Contact 功能描述: 制造商:Phoenix Contact 功能描述:UK 2 5 B RD
30013-13L
制造商:LENOX 功能描述:HOLE SAW BI-METAL 21MM
3001323
功能描述:DIN导轨式接线端子 UK 2 5 B OG
RoHS:否 制造商:Phoenix Contact 类型:Feed Through Modular Terminal Block 位置/触点数量:1 线规量程:26-14 电流额定值:5 A, 15 A 电压额定值:300 V, 600 V 安装风格: 端接类型:Push-In