
The InteliTender Model 300 is suitable for both charging and tending batteries of 100 Amp Hour capacity and less. The
instrument is available in 6 and 12 volt versions. When larger batteries are involved, the charging time increases, but the ability to
Tend or maintain is undiminished through 100 Amp Hours. The InteliTender 300 is designed primarily for use in either
recharging smaller batteries in the range of 25 Amp Hours, or charging and Tending batteries used intermittantly up to 100 Amp
Hours. If a larger batteries must be recharged quickly, the Model 520 or Model 1200 may be used. To determine which charger is best
suited to recharge a given battery, divide the Amp-Hour capacity of the battery to be recharged by 10, and choose the instrument
whose Bulk Charge current is closest to that number. Figure 3 permits the user to determine the approximate recharge time for a
battery that has given up 70% of its rated capacity. This discharge exceeds most manufacturers recommendations, where maximum
discharge is limited to 60% of rated capacity.
FIGURE 3
Specifications
FIGURE 4
Model 300-6
Model 300-6/750
Model 300-12
Model 300-12/750
Bulk Charge
1.5 Amps
.75 Amps
1.5 Amps
.75 Amps
Current
Bulk Charge
5 - 7 Volts
5 - 7 Volts
10 - 14 Volts
10 - 14 Volts
Voltage Range
Absorption Mode
1.4 - .5 Amps
.70 - .25 Amps
1.4 - .5 Amps
.70 - .25 Amps
Current
Absorption Mode
7 -7.25 Volts
7 -7.25 Volts
14 -14.5 Volts
14 -14.5 Volts
Voltage Range
Float Voltage
DC Voltage In
AC Voltage In
Frequency In
Power In
6.9 Volts
11-30 VDC
220 VAC
60 Hz
30 Watts
6.9 Volts
11-30 VDC
220 VAC
60 Hz
20 Watts
13.8 Volts
11-30 VDC
220 VAC
60 Hz
50 Watts
13.8 Volts
11-30 VDC
220 VAC
60 Hz
30 Watts
Size:
7” Long, 2.5” High, 3.5” Deep
Mounting:
4 ea #6 screws, 7.75” x 2.75”
Weight:
4.2 lbs., 1.9 Kg
Aluminum body
Electrolytic Hardcoat
0-50 Degrees C
Construction:
Finish:
Operating Temperature:
Optional, -40 - 50 Degrees C
PATCO ELECTRONICS, INC . * 1855 SHEPHARD DRIVE * TITUSVILLE * FL * 32780
PHONE (321) 268-0205 FAX (321) 264-4253